Uses & Features of high speed mixer
1. It is used in mixing, drying, colouring and other processing. It is the most ideal equipment for producing shaped plastic material and plastics pipes.
2. The technology of the mainshaft sealed apparatus has got the state patent with No. ZLP62430641 and it has two functions of electric and steam heating.
3. Two layers of sealing technology is adopted in the pot cover. The opening of the heating mixed cover adopted the airopening device and the opening of the cooling mixed cover adopted hydraulic pressure control system.
4. The electric control section with the programmable logic control adopted well-known imported meters and control components.
5. It could be equipped with the dust removing device.
6. The blades have been passed the test of the dynamic and static balance testing machine.
6. Manual feeding, vacum feeding or screw feeding is available.
Main technical parameter
SRL-Z100/200 Mixing Unit
| SRL-Z100/200 Mixer unit |
Technical data |
| Mechanical parts |
| Hot-mixing |
Cold mixing |
| Total volume(L) |
100 |
Total volume(L) |
200 |
| Effective volume(L) |
65 |
Effective volume(L) |
130 |
| batch(KG) |
50 |
batch(KG) |
100 |
| Mixing time(min) |
8-10 |
Mixing time(min) |
8-10 |
| capacity(KG/H) |
200-250 |
capacity(KG/H) |
200-250 |
| Heating method |
Self-fiction |
Cooling method |
Interlayern water, cooling water ring |
| Temperature measurement method |
thermocouple thermometer |
Temperature measurement method |
thermocouple thermometer |
| Blade material |
Stainless steel |
Blade material |
Stainless steel |
| Blade form |
Disc |
Blade form |
Single blade |
| Blade max rotation speed(rpm) |
465/930 |
Blade max rotation speed(rpm) |
100 |
| Spindle material |
40CrHRC28-32 |
Spindle material |
40CrHRC28-32 |
| Seal method |
Four skeleton seal |
Seal method |
Four skeleton seal |
| Oil seal brand |
Taiwan TTO seal ring |
Oil seal brand |
Taiwan TTO seal ring |
| Lubrication method |
Butter oil gun injection |
Lubrication method |
Butter oil gun injection |
| Spindle transmission method |
Belt transmission |
Spindle transmission method |
Belt transmission |
| Lid open method |
Cylinder open |
Lid open method |
Cylinder open |
| Lid close method |
Snap joint lock |
Lid close method |
Snap joint lock |
| Lid open protect |
Limit switch |
Lid open protect |
Limit switch |
| Lining material |
Stainless steel |
Lining material |
Stainless steel |
| Lining thickness(mm) |
6 |
Lining thickness(mm) |
6 |
| ectotheca material |
High-grade carbon steel |
ectotheca material |
High-grade carbon steel |
| Ectotheca thickness(mm) |
6 |
Ectotheca thickness(mm) |
6 |
| Interlayer filter |
10mm heatinsulation cotton |
Interlayer filter |
Cooling water |
| Outermost layer material |
0.8mm mirror board |
Outermost layer material |
none |
| Laying-off method |
Plunger type of door stopper |
Laying-off method |
Plunger type of door stopper |
| Electrical parts |
| Hot mixing motor power |
22kw |
| Cold mixing motor power |
4kw |
| Contactor |
Schneider |
| Temperature controller |
Omron |
| Air switch |
LS |
SRL-Z200/500 Mixing Unit
| SRL-Z200/500 Mixer unit |
Technical data |
| Mechanical parts |
| Hot-mixing |
Cold mixing |
| Total volume(L) |
200 |
Total volume(L) |
500 |
| Effective volume(L) |
150 |
Effective volume(L) |
320 |
| batch(KG) |
70 |
batch(KG) |
70 |
| Mixing time(min) |
8-10 |
Mixing time(min) |
8-10 |
| capacity(KG/H) |
280-350 |
capacity(KG/H) |
280-350 |
| Heating method |
Self-fiction |
Cooling method |
Interlayern water, cooling water ring |
| Temperature measurement method |
thermocouple thermometer |
Temperature measurement method |
thermocouple thermometer |
| Blade material |
Stainless steel |
Blade material |
Stainless steel |
| Blade form |
Disc |
Blade form |
Single blade |
| Blade max rotation speed(rpm) |
475/950 |
Blade max rotation speed(rpm) |
130 |
| Spindle material |
40CrHRC28-32 |
Spindle material |
40CrHRC28-32 |
| Seal method |
Four skeleton seal |
Seal method |
Four skeleton seal |
| Oil seal brand |
Taiwan TTO seal ring |
Oil seal brand |
Taiwan TTO seal ring |
| Lubrication method |
Butter oil gun injection |
Lubrication method |
Butter oil gun injection |
| Spindle transmission method |
Belt transmission |
Spindle transmission method |
Belt transmission |
| Lid open method |
Cylinder open |
Lid open method |
Cylinder open |
| Lid close method |
Snap joint lock |
Lid close method |
Snap joint lock |
| Lid open protect |
Limit switch |
Lid open protect |
Limit switch |
| Lining material |
Stainless steel |
Lining material |
Stainless steel |
| Lining thickness(mm) |
5 |
Lining thickness(mm) |
5 |
| Ectotheca material |
High-grade carbon steel |
Ectotheca material |
High-grade carbon steel |
| Ectotheca thickness(mm) |
5 |
Ectotheca thickness(mm) |
5 |
| Inter layer filter |
10mm heat insulation cotton |
Inter layer filter |
Cooling water |
| Outermost layer material |
0.8mm mirror board |
Outermost layer material |
none |
| Laying-off method |
Plunger type of door stopper |
Laying-off method |
Plunger type of door stopper |
| Electrical parts |
| Hot mixing motor power(KW) |
30/42kw(double speed motor) |
| Cold mixing motor power(KW) |
11kw |
| Contactor |
Schneider |
| Temperature control sheet |
Omron |
| Air switch/ breaker |
LS |
| Relay/ button |
Schneider |
SRL-Z300/600 Mixing Unit
| SRL-Z300/600 Mixer unit |
Technical data |
| Mechanical parts |
| Hot-mixing |
Cold mixing |
| Total volume(L) |
300 |
Total volume(L) |
600 |
| Effective volume(L) |
225 |
Effective volume(L) |
380 |
| batch(KG) |
105 |
batch(KG) |
105 |
| Mixing time(min) |
8-10 |
Mixing time(min) |
8-10 |
| capacity(KG/H) |
450-550 |
capacity(KG/H) |
450-550 |
| Heating method |
Self-fiction |
Cooling method |
Interlayern water, cooling water ring |
| Blade max rotation speed(rpm) |
465/930 |
Blade max rotation speed(rpm) |
100 |
| Electrical parts |
| Hot mixing motor power(KW) |
55kw |
| Speed controller for Hot mixing motor |
ABB inverter |
| Cold mixing motor power(KW) |
7.5kw |
SRL-Z500/1000 Mixing Unit
| SRL-Z500/1000 Mixer unit (with inverter) |
Technical data |
| Mechanical parts |
| Hot-mixing |
Cold mixing |
| Total volume(L) |
500 |
Total volume(L) |
1000 |
| Effective volume(L) |
375 |
Effective volume(L) |
640 |
| batch(KG) |
190 |
batch(KG) |
380 |
| Mixing time(min) |
8-12 |
Mixing time(min) |
8-12 |
| capacity(KG/H) |
700-800 |
capacity(KG/H) |
700-800 |
| Heating method |
Self-fiction |
Cooling method |
Interlayern water, cooling water ring |
| Blade max rotation speed(rpm) |
465/930 |
Blade max rotation speed(rpm) |
100 |
| Electrical parts |
| Hot mixing motor power (KW) |
75kw |
| Speed controller for Hot mixing motor |
ABB inverter |
| Cold mixing motor power (KW) |
15kw |
About Jiangsu ACEMIEN Machinery:
Jiangsu ACEMIEN Machinery Co., Ltd is specialized on plastic extrusion and recycling machinery manufacturing.
We have been producing and selling for over 6years. Our equipment is exported to Asia, Africa, etc,
We have top-ranking Research and Development technology system and rich experienced technician team.
Our vision is to offer you the best and the most appropriate plastic extrusion and recycling solution, to offer you the most reliable technically and commercial service support.
Turnkey project service:
1. we will provide all the machines for the complete production according to customer's requirements.
2. we will provide complete service for factory layout and other information to help customer to build the factory.
3. we can also provide the raw material to the customer if you need.
4. we will provide good service for machine installation and training, until the customers can run the machines and make stably production.
5. Except one year quality guarantee, we will provide after-sell service for all the life.
6. For long-term cooperation, we always provide good quality, good price and good service to customer. we are the professional and trustable supplier for turnkey projects. Let us do win-win business together.
Product Tags:
|
|
High Efficiency Pvc Plastic Pelletizing Machine Powder Mixer 380V 50HZ 3Phase Images
|
